1.1 產品概述 1.1 Product overview ASD 系列開關柜綜合測控裝置用于 3~35kV 戶內開關柜，適用于中置柜、手車柜、固定柜、環 網柜等多種開關柜。具有一次回路模擬圖及開關狀態指示，高壓帶電顯示及核相，自動溫濕度控制， 加熱回路故障告警，分合閘回路完好指示、分合閘回路電壓測量、預分預合閃光指示、電氣節點無 線測溫，人體感應自動照明，語音提示，電參數測量及 RS485 通訊接口等眾多功能，集操作、顯示 于一體。產品按功能分為 ASD100L、 ASD100G、ASD200、ASD300、ASD310、ASD320 六種型號。 ASD series switch cabinet integrated measuring and control device is used for 3-35kV indoor switch cabinet, applying to centrally installed switchgear, trolley cabinet, fixed switchgear, ring main unit and other various switch cabinets. With primary circuit mimetic diagram and switch status indicator, HV live displaying and nuclear phase, automatic temperature and humidity control, heating circuit fault alarm, wireless temperature measurement, tripping circuit and closing circuit supervising, tripping circuit and closing circuit control voltage measurement, pre-tripping circuit and pre-closing indication，body induction auto lighting, voice prompt, electrical parameter measurement and RS485 communication interface and other numerous functions, it has integrated operation and display into one. The product is classified into ASD100L, ASD100G, ASD200, ASD300, ASD310, ASD320 six models according to its function.

            1.5 產品安裝 1.5 Product installation ASD 系列開關柜綜合測控裝置采用面板嵌入式安裝，首先柜體盤面上制作規定尺寸的長方形槽 孔，裝置取下支架后嵌入槽孔，再用支架固定即可。 Panel embedded installation is adopted for ASD series switch cabinet integrated measuring and control device: firstly fabricate rectangular slot with stipulated size on cabinet face; embed the device into the slot after taking down the support and then fix by support                                            

1.5.3 溫濕度傳感器、無線溫度收發器的安裝 1.5.3 Installation of temperature and humidity sensor, wireless temperature transceiver 與 ASD 系列產品配套使用的溫濕度傳感器，可以采用導軌（DIN35mm）安裝方式，也可以使 用螺栓固定方式; 無線測溫接收器直接安裝在 ASD 的無線測溫接口（61~64），并連接好天線；產 品尺寸外觀如圖 1.7 所示。 The temperature and humidity sensor used as ancillary with ASD series products can adopt guide rail (DIN35mm) installation or bolt fixing; the wireless temperature transceiver is directly installed on the wireless temperature measurement interface (61 ~ 64) of ASD and connected with the antenna; as shown in Figure 1.7